Product Description- TCS 357 M is a fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer spray coating material. TCS 357 M is used by itself or in combination with other materials to produce coatings, liners, wearing course sand resilient surfaces on metal and other substrates. Its extremely fast gel time makes it suitable for applications down to -40°F without special conditioning of the component resins and isocyanates. TCS 357 M produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 to 1000 mils with appreciable sag or runs. TCS 357 M may be applied in all positions and to any properly prepared substrates. TCS 357 M is inert, it will not hydrolyze, leach, or contaminate other materials, and can be bonded and painted. TCS 357 M is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions.
Uses: TCS 357 M is a superior concrete and metal coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, most corrosive substrates and abrasive action. TCS 357 M is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or without reinforcements, TCS 357 M may be used in transitional areas with confidence. TCS 357 M may be used in interior or exterior applications.